Drywall Calculator - Sheets, Mud & Tape, Walls and Ceiling

    Room size and wall height in, sheet count out. Counts 4 x 8, 4 x 10 or 4 x 12 ft drywall sheets for walls and ceiling, then the joint compound, tape and screws to finish them.

    Parameters

    Enter data for calculations

    A room adds up all four walls

    Room length or wall length

    Floor to ceiling

    Empty = nothing deducted

    Longer sheets, fewer seams

    Empty = 10%

    Form progress0 / 4 fields

    💡 Fill in all required fields to unlock the calculate button

    How much drywall a room takes, walls and ceiling

    Type the room size and wall height, say whether the ceiling gets drywall too, pick a sheet size, and the drywall calculator returns the number of sheets plus the tape, joint compound and screws to finish them. A 12 x 12 ft room with 8 ft walls and the ceiling covered is 528 sq ft of drywall, which comes to 19 sheets of 4 x 8 ft with a 10% waste allowance.

    Quick start: room, 12 by 12 ft, 8 ft high, ceiling yes, 4 x 8 ft sheets, waste left empty. You get 14 sheets for the walls, 5 for the ceiling, about 5.0 gal of lightweight joint compound, 195 ft of tape and 1.4 lb of drywall screws.

    Measuring up before you open the form

    1. Room or one wall - a room adds up all four walls (twice the length plus twice the width, times the height). Pick one wall for a basement wall, an accent wall or a closet side.
    2. Length and width - inside dimensions in feet, wall to wall at the floor. An L-shaped room works as two rectangles run one after the other.
    3. Wall height - floor to ceiling in feet. Most houses have 8 ft walls, newer ones often 9 ft.
    4. Ceiling - yes adds length times width as a separate group of sheets.
    5. Openings - square feet of doors and windows to leave out. Empty means nothing is deducted.
    6. Sheet size - 4 x 8, 4 x 10 or 4 x 12 ft, the three lengths most yards stock.
    7. Waste - 10% for a plain box room, 15% for many corners, soffits or a sloped ceiling. Empty means 10%.

    Seven rooms run through the calculator

    Each row is a result from the calculator, waste 10% unless the row says otherwise. Sheets are counted for walls and ceiling separately and then added, because an offcut from the ceiling seldom fits a wall.

    JobDrywall areaSheetsLightweight mudTape
    12 x 12 ft bedroom, 8 ft, with ceiling528 sq ft19 of 4 x 85.0 gal195 ft
    Same room with 4 x 10 ft sheets528 sq ft15 of 4 x 105.0 gal195 ft
    10 x 12 ft room, walls only, 32 sq ft of openings320 sq ft11 of 4 x 83.0 gal118 ft
    14 x 16 ft living room, ceiling, 41 sq ft of openings663 sq ft17 of 4 x 126.2 gal245 ft
    20 x 14 ft room, 9 ft walls, ceiling892 sq ft22 of 4 x 128.4 gal330 ft
    24 x 24 ft garage, walls only, waste 15%768 sq ft28 of 4 x 87.2 gal284 ft
    One 16 x 8 ft wall, 4 x 12 sheets, waste 15%128 sq ft4 of 4 x 121.2 gal47 ft

    The second row is worth a look. Same room, same 528 sq ft, but 15 longer sheets instead of 19 short ones. Fewer sheets means fewer seams to tape and fewer trips up the stairs, though each 4 x 10 is heavier to lift onto a ceiling.

    Tape, mud and screws per thousand square feet

    The finishing materials come from the fastener, compound and tape table in USG's drywall finishing guide. The figures cover flat joints, inside corners and metal corner bead in a typical room, and the calculator scales them to your square footage.

    MaterialPer 1,000 sq ftFor 500 sq ft
    Paper joint tape370 ft185 ft
    Lightweight all-purpose ready-mixed compound9.4 gal4.7 gal
    Regular all-purpose ready-mixed compound138 lb69 lb
    Type W drywall screws2.7 lb1.4 lb

    The screw weight assumes screws 12 in. apart on ceilings and 16 in. on walls. Lightweight compound is sold by volume, so the result rounds it up to 4.5 gal pails; the regular kind is listed in pounds. Tape is rounded up to 500 ft rolls.

    Why 4 x 12 sheets often beat 4 x 8

    Square footage is the same whatever you buy, so the sheet size changes only two things: how many seams there are and how many pieces you carry. Hung horizontally on an 8 ft wall, two rows of 4 ft sheets reach the ceiling exactly. A 12 ft wall then has one long seam and no butt joints with 4 x 12 sheets, while 4 x 8 sheets leave butt joints in both rows. Butt joints are the ends of the sheet with no taper, and they are the hardest joints to hide.

    On walls taller than 8 ft the third row is a strip, and the result points that out when you choose 4 x 8 ft sheets. On a ceiling, longer sheets mean fewer joints overhead, where sanding is hardest. The catch is weight and access: a 4 x 12 sheet of 1/2 in. board is a two-person lift, and it may not make the turn up a narrow stairway.

    Drywall estimate questions

    How many sheets of drywall do I need for a 12x12 room?

    With 8 ft walls and the ceiling included, 19 sheets of 4 x 8 ft or 15 of 4 x 10 ft, with 10% waste. Walls alone take 14 sheets of 4 x 8 ft (384 sq ft), so the ceiling adds another 5.

    Should I subtract doors and windows?

    For large openings, yes: a garage door or a wide patio door is a real saving. A 36 x 80 in. door is 20 sq ft and a 3 x 4 ft window is 12 sq ft. Many hangers leave small openings in and treat them as part of the waste, because the cutout comes out of a whole sheet anyway.

    How many sheets of drywall per bucket of mud?

    At 9.4 gal of lightweight compound per 1,000 sq ft, one 4.5 gal pail finishes about 479 sq ft, or roughly 15 sheets of 4 x 8 ft. Treat it as a planning figure: a level 5 finish or a rough substrate uses more.

    Does stud spacing change the number of sheets?

    No. Sheets are counted by area, and 4 ft wide sheets land on studs at both 16 in. and 24 in. on center. Spacing matters for the board itself: on a ceiling with framing 24 in. apart, check the maximum spacing the board maker allows, which is why sag-resistant ceiling panels exist.

    Is 10% waste enough?

    For a rectangular room with standard openings it usually is. Choose 15% for a room with many outside corners, a soffit, a stairwell or a sloped ceiling, where more of each sheet ends up as offcut.

    Related tools

    Concrete Steps Calculator

    Equal risers within the code limit, cubic yards and bags for solid entry steps - See the calculator

    Paint Calculator

    Gallons of primer and paint for the same walls once the mud is sanded - See the calculator

    Drywall Anchor Calculator

    Fastener grid for mounting board on walls and ceilings - See the calculator

    Insulation Calculator

    Batts or rolls for the stud bays before the board goes up - See the calculator

    Plaster Calculator

    Bags of plaster for a skim coat on walls and ceilings - See the calculator

    Flooring Calculator

    Square feet and boxes of flooring for the same room - See the calculator

    Tile Calculator

    Tiles, grout and adhesive for a bathroom wall or floor - See the calculator

    Similar calculators from this section