Gutter Size Calculator - 5 or 6 Inch, Downspouts, Rainfall

    Roof area, pitch and rainfall in, gutter size out. Compares 5 and 6 inch K-style and half-round gutters against the storm, counts downspouts and lists hangers, elbows and end caps.

    Parameters

    Enter data for calculations

    Eave length times plane width

    Rise per 12 inches of run

    Short, heavy storm for your location

    Along the eave

    K-style holds more

    Sets the area per downspout

    Empty = every 24 in.

    Form progress0 / 6 fields

    💡 Fill in all required fields to unlock the calculate button

    Gutter size from roof area, pitch and local rainfall

    Enter the roof area that drains to one gutter, the pitch and the rainfall intensity where you live, and this gutter size calculator picks the smallest gutter that carries the water, counts the downspouts and lists the hangers, elbows and end caps. A 1,000 sq ft roof plane at 6-in-12 in a place with a 6.8 in./hr design storm comes out at 7,480 sq ft of adjusted area, which is too much for a 5-inch K-style gutter (5,520) and fits a 6-inch one (7,960).

    The result also shows how full each of the four common sizes would run, and the rainfall at which each one would start to overflow on your roof.

    Seven inputs, in the order the form asks

    1. Roof area - square feet of roof that drains into this one gutter: length of the eave times the width of that roof plane. Do one gutter run at a time.
    2. Roof pitch - rise in inches per 12 inches of run. Steeper roofs catch more wind-driven rain, so the area is multiplied by a factor from 1.0 to 1.3.
    3. Rainfall intensity - inches per hour for a short, heavy storm. NOAA's Precipitation Frequency Data Server gives the 5-minute depth for your address; multiply it by 12.
    4. Gutter length - feet of gutter along the eave, used for hangers and the outlet rule.
    5. Gutter style - K-style (flat back, decorative front, the common choice) or half-round (holds less for the same width).
    6. Downspout type - 2 x 3 or 3 x 4 in. rectangular, or 3 or 4 in. round.
    7. Hanger spacing - 16, 24 or 36 inches. Closer spacing suits heavy snow and ice.

    Why a 5-inch gutter overflows in a storm it should handle

    The problem

    5-inch K-style is the default on most houses, and the rule of thumb says it handles 5,520 sq ft. That number is drainage area at 1 inch per hour of rain. A 1,000 sq ft roof plane looks tiny next to it, yet in a 6.8 in./hr cloudburst on a 6-in-12 roof the same gutter is asked to carry the equivalent of 7,480 sq ft, and water sheets over the front edge.

    The fix

    Scale the area before comparing: roof area × pitch factor × rainfall intensity. The calculator then picks the first size whose capacity is at least that number. When no single gutter is enough, it says how many separate runs the roof should be split into.

    The pitch factor reflects that rain does not fall straight down; a steep roof presents more of its face to wind-driven rain.

    Roof pitchPitch factor1,000 sq ft becomes, at 5 in./hr
    Flat to 3-in-121.05,000 sq ft
    4-in-12 to 5-in-121.055,250 sq ft
    6-in-12 to 8-in-121.15,500 sq ft
    9-in-12 to 11-in-121.26,000 sq ft
    12-in-12 or steeper1.36,500 sq ft

    Which gutter carries your adjusted area

    Read down until the capacity is at least your adjusted area. Half-round gutters look the part on older houses but carry less than half of a K-style of the same nominal width.

    Adjusted area up toK-styleHalf-roundWhat to do
    2,500 sq ft5 in.5 in.either style works
    3,840 sq ft5 in.6 in.half-round needs the bigger size
    5,520 sq ft5 in.too smallK-style only, or split the run
    7,960 sq ft6 in.too small6 in. K-style
    above 7,960 sq fttoo smalltoo smallsplit the roof into more runs, or a box gutter sized by an engineer

    Six roofs, six verdicts

    Each line below is what the calculator returned, with 2 x 3 in. downspouts unless stated.

    Roof planeAdjusted areaGutterDownspouts
    700 sq ft, 4-in-12, 5 in./hr, 40 ft3,6755 in. K-style, 67% full2
    1,000 sq ft, 6-in-12, 5 in./hr5,5005 in. K-style, 100% full2
    1,200 sq ft, low slope, 3 in./hr, 50 ft, 3 x 4 in.3,6005 in. K-style, 65% full1
    600 sq ft, 10-in-12, 4 in./hr, half-round2,8806 in. half-round, 75% full2
    500 sq ft, low slope, 2.5 in./hr, 64 ft1,2505 in. K-style, 23% full2 (one would cover the area; the 64 ft run needs two)
    1,600 sq ft, 6-in-12, 7.5 in./hr13,200split into 2 runs (166% of a 6 in.)3

    How many downspouts, and which kind

    The rule of thumb is about 1 square inch of downspout opening for every 100 sq ft of roof. In practice that gives these areas per downspout, which the calculator divides into your pitch-adjusted roof area. A gutter run of 60 ft or longer gets at least two outlets regardless.

    DownspoutRoof area per downspoutTypical match
    2 x 3 in. rectangular600 sq ft5 in. K-style
    3 in. round706 sq ft5 or 6 in. half-round
    3 x 4 in. rectangular1,200 sq ft6 in. K-style
    4 in. round1,255 sq ft6 in. half-round

    The downspout areas do not scale with rainfall, so above about 8 in./hr the calculator suggests one size up or an extra outlet. Each downspout is counted with three elbows: two to bring it back to the wall and one at the bottom to turn the water away from the foundation.

    Gutter sizing questions

    Where do I find the rainfall intensity for my area?

    NOAA's Precipitation Frequency Data Server (hdsc.nws.noaa.gov) shows rainfall depths for any point in the U.S. Pick the 5-minute duration and a return period, often 10 years for a house, read the depth in inches and multiply by 12 to get inches per hour.

    Is 5-inch or 6-inch gutter better?

    Neither is better in general; the 6-inch carries about 44% more (7,960 against 5,520 sq ft) and takes 3 x 4 in. downspouts that clog less. For a small roof in a mild climate 5-inch is enough. The "rainfall that would fill each size" line in the result shows how much margin each one leaves on your roof.

    Do I measure the roof area along the slope or from above?

    For this method, measure the roof plane that drains into the gutter: eave length times the width of that plane. The pitch factor then adds the extra for steep roofs, so do not add a second slope correction.

    What if a valley dumps water into one spot?

    A valley concentrates the flow from two roof planes on a short stretch of gutter. Add the area of both planes that feed it, and put a downspout close to where the valley meets the gutter.

    How should gutters slope toward the downspout?

    Installers commonly pitch gutters about 1/4 inch per 10 feet toward the outlet. That fall is small enough to look level from the ground and is not part of this sizing method, which assumes a properly pitched gutter.

    Related tools

    Pipe Slope Calculator

    Code minimum fall per foot under the IPC, IRC or UPC and the total drop over a drain run - See the calculator

    Linear Interpolation Calculator

    A value between two known points or two rows of a table, worked backwards too - See the calculator

    Roof Calculator

    Roof area, squares and shingle bundles from the footprint and pitch - See the calculator

    Roof Pitch Calculator

    Pitch in inches per 12, degrees and percent from rise and run - See the calculator

    Rainwater Harvesting Calculator

    Gallons the same roof sends to a rain barrel or cistern - See the calculator

    Plumbing Pipe Calculator

    Pipe footage and fittings for water and drain lines - See the calculator

    Garden Irrigation Calculator

    How much water a garden needs, a use for the water the downspouts deliver - See the calculator

    House Building Cost Calculator

    Budget for the whole build, roofing and gutters included - See the calculator

    Similar calculators from this section